Bấm vào để xem ảnh phóng to

G.Skill Trident Z Royal Elite 32GB ( 2x16GB) DDR4 4000MHz CL18 - Gold

Thương hiệu: Gskill Ripjaws
Mã Sản phẩm: F4-4000C18D-32GTEG
Giá: Liên hệ
(Đã bao gồm VAT)
Bảo hành: 36 tháng. (Quy định bảo hành)
Tùy chọn sản phẩm: RAM Kit 2, Vàng, 32GB, DDR4 4000MHz, CL18,
Tư vấn & Mua hàng - Gọi 1900 9064
  • Freeship với đơn hàng trên 1.000.000đ
  • Giao hàng ngay (Nội thành TP.HCM)
  • Thu cũ đổi mới - Hỗ trợ tận nơi !
  • Chương trình tích lũy điểm sử dụng để trừ vào đơn hàng kế tiếp hoặc quy đổi quà
  • Giao trong vòng 2 đến 3 ngày làm việc (Toàn quốc) 

MIỄN PHÍ CHARGE THẺ

Chuẩn Ram DDR4
Dung lượng 32GB (2 x 16GB)
Multi-Channel Kit Dual Channel Kit
Tốc độ chứng thực 4000MHz
Độ trễ chứng thực CL18-22-22-42
Nguồn điện 1.35V
Registered/Unbuffered Unbuffered
Sửa lỗi Non-ECC
SPD Speed 2133 MT/s
SPD Voltage 1.20V
Tản nhiệt Không
Tính năng Intel XMP 2.0 (Extreme Memory Profile) Ready
Phụ chú
  • For best system stability, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues.
  • The memory kit will boot at the SPD speed when BIOS settings are at default.
  • Enable XMP/DOCP/A-XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit.
  • Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard & CPU.
Đèn LED
G.Skill Trident Z Royal Elite 32GB ( 2x16GB) DDR4 4000MHz CL18 - Gold
Giá: Liên hệ
Thay đổi thuộc tính
Thông số kỹ thuật
Chuẩn Ram DDR4
Dung lượng 32GB (2 x 16GB)
Multi-Channel Kit Dual Channel Kit
Tốc độ chứng thực 4000MHz
Độ trễ chứng thực CL18-22-22-42
Nguồn điện 1.35V
Registered/Unbuffered Unbuffered
Sửa lỗi Non-ECC
SPD Speed 2133 MT/s
SPD Voltage 1.20V
Tản nhiệt Không
Tính năng Intel XMP 2.0 (Extreme Memory Profile) Ready
Phụ chú
  • For best system stability, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues.
  • The memory kit will boot at the SPD speed when BIOS settings are at default.
  • Enable XMP/DOCP/A-XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit.
  • Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard & CPU.
Đèn LED
Sản phẩm tương tự